Wiesław Świątnicki

Wiesław Świątnicki, Ph.D., D.Sc., Eng.

Associate professor of Warsaw University of Technology


This email address is being protected from spambots. You need JavaScript enabled to view it.

+48 22 234-81-03


Research topics
Research methods

Publications

  1. E. Skołek, K. Wasiak, W.A. Świątnicki: Structure and properties of the carburised surface layer on 35CrSiMn5-5-4 steel after nanostructurization treatment , Materials and Technology (Materiali in Tehnologije) 49 (2015) 6, 933–939.
  2. E. Skołek, S. Marciniak, P. Skoczylas, J. Kamiński, W.A. Świątnicki, Nanocrystalline Steels’ Resistance to Hydrogen Embrittlement , Archives of Metallurgy and Materials, vol. 60, No. 1 (2015) pp. 491-497.
  3. E. Skołek, K. Dudzińska, J. Kamiński, W.A. Świątnicki, Corrosion Resistance of the Bearing Steel 67SiMnCr6-6-4 with Nanobainitic Structure , Archives of Metallurgy and Materials, vol. 60, No. 1 (2015) pp. 503-510.
  4. E. Skołek, S. Marciniak, W.A. Świątnicki, Thermal Stability of Nanocrystalline Structure in X37CrMoV5-l Steel , Archives of Metallurgy and Materials, vol. 60, No. 1 (2015) pp. 511-516.
  5. S. Marciniak, E. Skołek, W.A. Świątnicki, The Effect of Stepped Austempering on Phase Composition and Mechanical Properties of Nanostructured X37CrMoV5-1 Steel , Archives of Metallurgy and Materials, vol. 60, No. 1 (2015) pp. 517-522.
  6. D. Myszka, K. Wasiluk, E. Skołek and W. Świątnicki: Nanoausferritic matrix of ductile iron Materials Science and Technology, vol. 31, no 7 (2015) 829-834.
  7. Skołek Emilia, Marciniak Szymon, Świątnicki Wiesław: Determination of phase composition in commercial Cr-Si-Mn steel after austempering treatment, Inżynieria Materiałowa, rok XXXV, nr 2 (2014) 199-202
  8. Gołaszewski Adam, Szawłowski Jerzy, Świątnicki Wiesław: Formation of ferritic-bainitic structure with retained austenite in hypoeutectoid steel, Inżynieria Materiałowa, rok XXXV, nr 2 (2014) 121-126
  9. Dworecka Julita, Jezierska Elżbieta, Rożniatowski Krzysztof, Świątnicki Wiesław: Characterization of Nanobainitic Structure Obtained in 100CrMnSi6-4 Steel after Industrial Heat Treatment , Archives of Metallurgy and Materials, vol. 59, nr 4 (2014) 1637-1640
  10. Wasiluk Kamil, Skołek Emilia, Świątnicki Wiesław: Microstructure and Properties of Surface Layer of Carburized 38CrAlMo6-10 Steel Subjected to Nanostructurization by a Heat Treatment Process , Archives of Metallurgy and Materials, vol. 59, nr 4 (2014) 1686-1690
  11. Wasiluk Kamil, Wasiak Krzysztof, Skołek Emilia, Świątnicki Wiesław: Formation of Nanobainitic Structure in Carburized Layer of Structural Steels, Proceedings of 23rd International Conference on Metallurgy and Materials METAL2014, Brno, Czech Republic, May 21st - 23rd 2014 Ed.: TANGER Ltd., Ostrava, 2014, ss. 488-493
  12. Gołaszewski Adam, Szawłowski Jerzy, Świątnicki Wiesław: Determination of the Heat Treatment Parameters Allowing to Obtain a Ferritic-Bainitic-Austenitic Microstructure in the Structural Steel, w: Proceedings of 23rd International Conference on Metallurgy and Materials METAL2014, Brno, Czech Republic, May 21st - 23rd 2014 Ed.: TANGER Ltd., Ostrava, 2014ss. 663-667
  13. Marciniak Szymon, Świątnicki Wiesław: Temperature Stability of Carbide-Free NANObainite with Residual Austenite in X37CrMoV5-1 Steel, w: Proceedings of 23rd International Conference on Metallurgy and Materials METAL2014, Brno, Czech Republic, May 21st - 23rd 2014 Ed.: TANGER Ltd., Ostrava, 2014, ss. 744-750
  14. Wasiak Krzysztof, Skołek Emilia, Świątnicki Wiesław: Analysis of the Microstructure and Wear Resistance 35CrSiMn5-5-4 Steel after Quenching and Partitioning, w: Proceedings of 23rd International Conference on Metallurgy and Materials METAL2014, Brno, Czech Republic, May 21st - 23rd 2014 Ed.: TANGER Ltd., Ostrava, 2014, ss. 790-793
  15. Skołek Emilia, Dudzińska Karolina, Kamiński Janusz, Świątnicki Wiesław: Corrosion Resistance of Nanostructured 67SiMnCr6-6-4 Bearing steel, w: Proceedings of 23rd International Conference on Metallurgy and Materials METAL2014, Brno, Czech Republic, May 21st - 23rd 2014 Ed.: TANGER Ltd., Ostrava, 2014, ss. 998 – 1003
  16. J. Dworecka, K. Pobiedzińska, E. Jezierska, K. Rożniatowski, W. Świątnicki: Nanocrystalline structure obtained by isothermal treatment in bearing steel, Inżynieria Materiałowa, rok XXXIV, nr 7 (2013) 1-4.
  17. K. Wasiak, B. Gołębiowski, W. Świątnicki: Microstructure and properties of carburized surface layer in 21NiCrMnV4-3-2-2 stell after austempering Inżynieria Materiałowa , rok XXXIV, nr 4 (2013) 386-389
  18. K. Wasiluk, E. Skołek, W.A. Świątnicki: Wytwarzanie niskotemperaturowego bainitu w warstwie nawęglonej stali chromowo- molibdenowej z aluminium, Inżynieria Materiałowa, rok XXXIV, nr 6 (2013) 911-915
  19. E. Skołek, K. Wasiak, J. Krasoń, W.A. Świątnicki: Wytwarzanie bainitu bezwęglikowego w warstwie wierzchniej stali chromowo- krzemowo- manganowej po nawęglaniu próżniowym, Inżynieria Materiałowa, rok XXXIV, nr 6 (2013) 868-872
  20. K. Wasiak, K. Wasiluk, E. Skołek, W. Świątnicki, J. Szawłowski, M. Sut, M. Bazel, M. Korecki, J. Krasoń: Wytwarzanie struktury nanokrystalicznej w warstwach wierzchnich stali po nawęglaniu próżniowym, Piece Przemysłowe & Kotły, Vol. 11-12 (2013) 16-21
  21. P. Pawluk, E. Skołek, M. Kopcewicz, W. Świątnicki: The comparative study of phase composition of steels using X-ray diffraction and Mössbauer spectroscopy methods, Diffusion and Defect Data Pt.B: Solid State Phenomena, vol. 203-204 (2013) 150-155
  22. W. Świątnicki, K. Pobiedzińska, E. Skołek, A. Gołaszewski, S. Marciniak, Ł. Nadolny, J. Szawłowski: Otrzymywanie struktury nanokrystalicznej w stalach przy wykorzystaniu przemiany bainitycznej, Inżynieria Materiałowa, rok XXXIII, nr 6 (2012) 524-529
  23. B. Gołębiowski, W. Świątnicki: Microstructural changes induced during hydrogen charging process in stainless steels with and without nitrided layers, Solid State Phenomena, vol. 186 (2012) 305-310
  24. J. Smalc-Koziorowska, E. Jezierska, W. Świątnicki: Identification of phases in alloy steels after quenching and after isothermal quenching, Solid State Phenomena, vol. 186 (2012) 301-304
  25. B. Gołębiowski, T. Zakroczymski, W. Świątnicki: The effect of low-temperature glow discharge nitriding of duplex stainless steel on absorption and desorption of hydrogen, Solid State Phenomena, vol. 183 (2012) 71-80
  26. B. Gołębiowski, W.A. Świątnicki, M. Gasperini: Microstructural changes induced near crack tip during corrosion fatigue tests in austenitic – ferritic steel, Journal of Microscopy-Oxford, vol. 237 (2010) 352–358
  27. B. Gołębiowski, M. Kamiński, W.A. Świątnicki: Badanie wpływu niskotemperaturowego azotowania jarzeniowego stali dupleks na jej odporność korozyjną po wodorowaniu, Inżynieria Materiałowa, rok XXXI, nr 4, (2010) 972-977
  28. B. Gołębiowski, T. Zakroczymski, R. Sobiecki, W.A. Świątnicki: Characteristics of surface layers produced on austenitic-ferritic stainless steel by low temperature glow discharge nitriding, Inżynieria Materiałowa, rok XXXI, nr 3, (2010) 320-323
  29. W. Świątnicki: The role of hydrogen induced microstructural changes in the embrittlement of austenitic-ferritic steel, Proceedings of the 2008 International Hydrogen Conference - Effects of Hydrogen on Materials, Jackson Lake Lodge, 7-10 September, editors: Brian Somerday, Petros Sofronis, Russell Jones, ASM International (2009) 155-162
  30. A. Głowacka, A. Gołaszewski, W.A. Świątnicki: Hydrogen Embrittlement of Austenitic-Ferritic Steel, Inżynieria Materiałowa, rok XXVIII, nr 3-4 (2007) 768-773
  31. A. Głowacka, W.A. Świątnicki, E. Jezierska: Hydrogen induced defects in austenite and ferrite of a duplex steel, Journal of Microscopy, vol. 223 Issue 3 (2006) 282-284
  32. M. Lewandowska, W. Świątnicki, A. Piątkowski, Z. Jasieński: Microstructure evolution and strain localization in Cu and Cu8Al single crystals subjected to channel-die compression, Journal of Microscopy, vol. 223 Issue 3 (2006) 275-278
  33. A. Głowacka, M.J. Woźniak, G. Nolze i W.A. Świątnicki: Hydrogen induced phase transformations in austenitic-ferritic steel, Solid State Phenomena, vol. 112 (2006) 133-140
  34. A. Głowacka, G. Nolze, W.A. Świątnicki: EBSD study of corrosion fatigue of austenitic-ferritic steel, Archives of Metallurgy and Materials Quarterly, vol. 50, Issue 1 (2006) 7-11
  35. A.L. Etter, T. Baudin, M.H. Mathon, W. Świątnicki, R. Penelle: Stored energy evolution in both phases of a duplex steel as a function of cold rolling reduction, Scripta Mater. vol. 54, Issue 4 (2006) 683-688
  36. T. Zakroczymski, A. Głowacka, W.A. Świątnicki: Effect of hydrogen concentration on the embrittlement of a duplex stainless steel, Corrosion Science, vol. 47 (2005) 1403-1414
  37. A. Głowacka, M.J. Woźniak, W.A. Świątnicki: AFM study of austeno-ferritic stainless steel microstructure after cathodic hydrogen charging, Journal of Alloys and Compounds, vols. 404-406C (2005) 595-598
  38. A. Głowacka, W.J. Woźniak, W.A. Świątnicki: Nanoindentation measurements of austeno-ferritic stainless steel submitted to hydrogen charging, Reviews on Advanced Materials Science, vol. 8 (2004) 66-68
  39. W. Oliferuk, W.A. Świątnicki, J. Krzyczkowska, M.W. Grabski: Partition of plastic work into dissipated and stored energy in austenitic-ferritic steel during tensile deformation, Inżynieria Materiałowa, rok XXV, nr 3 (2004) 404-406
  40. A. Głowacka, W. A. Świątnicki: Effect of Hydrogen on the Microstructure Evolution of Duplex Stainless Steel, Journal of Alloys and Compounds, vol. 356-357 (2003) 701-704
  41. W. Zieliński, W. Świątnicki, M. Barstch, U. Messerschmidt: Non-uniform distribution of plastic strain in duplex steel during TEM in situ deformation, Materials Chemistry and Physics, vol. 81 (2003) 476-479
  42. A. Głowacka, W. Świątnicki: Effect of hydrogen charging on the microstructure evolution of duplex stainless steel, Materials Chemistry and Physics, vol. 81 (2003) 496-499
  43. W. Świątnicki, T. Baudin, J. Jura, M.H. Mathon, A. Głowacka: TEM Examination of the Microstructure Evolution in the Duplex Austenitic-Ferritic Steel, Journal Problems of Materials Science (Voprosy Materialovedeniya), No 1 (33) (2003) 96-103
  44. M. Gaspérini, W. Świątnicki: Plastic Localization by Macroscopic Shear-Banding During Shear Tests of Heavily Cold Rolled Aluminium Alloys, Journal Problems of Materials Science (Voprosy Materialovedeniya), No 1 (33) (2003) 88-95
  45. A. Głowacka, T. Zakroczymski and W.A. Swiatnicki: The Influence of Cathodic Charging the Ductility and Fracture Mode of A Duplex Stainless Steel, Proceedings of the International Symposium on Corrosion and Hydrogen Degradation MSCHS 2003: Advances in Corrosion Science and Application, 9-13 wrzesień, 2003 Zakopane, Red. T. Zakroczymski, s. 78-82
  46. J. Jura, T. Baudin, M.H. Mathon, W. Świątnicki and R. Penelle: Texture analysis in the cold-rolled and recrystallized ferritic-austenitic steel with duplex structure, Materials Science Forum, vols. 408-412 (2002) 1359-1364
  47. Buraczyńska, W.A. Świątnicki, J.J. Bucki: Steorogical analysis of particle size distributions in the 1200 Al-alloy using various microscopic techniques, Inżynieria Materiałowa, rok XXII, nr 4 (2001) 250-252
  48. M. Lewandowska, W.A. Świątnicki: Microstructural evolution during strain path changes in an aluminium alloy, Inżynieria Materiałowa, rok XXII, nr 4 (2001) 544-546
  49. W.A. Świątnicki, K.J. Kurzydłowski: The effect of austenite dispersion and austenite-ferrite boundaries on hardness of a duplex stainless steel, Proceedings Sixth International Conference on Stereology and Image Analysis in Materials Science, STERMAT 2000, eds. L. Wojnar, K. Rożniatowski, Kraków 2000, p. 421-428
  50. G.F. Dirras, J.L. Duval, W. Świątnicki: Macroscopic behaviour versus dislocation substructures development under cyclic shear tests on the aluminium 3004 alloy, Materials Science & Engineering, vol. A263 (1999) 85-95
  51. M. Gasperini, W. Świątnicki: Microstructural evolution and mechanical behaviour during shear tests of aluminium alloys previously heavily cold rolled, Proceedings of the 20th Risø International Symposium on Materials Science: Deformation-Induced Microstructures: Analysis and Relation to Properties, Risø National Laboratory, Roskilde, Denmark 1999, p. 341-346
  52. M. Gasperini, W. Świątnicki: Anisotropy and inhomogeneities in thin sheets of commercial aluminium alloys submitted to simple shear, Archives of Metallurgy, vol. 44 (1999) 434-451
  53. W. Świątnicki: Dislocation structures formed during shear deformation in commercial aluminium alloys, Proceedings of the X Conference on Electron Microscopy of Solids, red. E. Jezierska, J.A. Kozubowski, Warszawa-Serock, 1999, str. 317-322
  54. W. A. Świątnicki, W. Zieliński: Mechanical properties of interphase boundaries in austenitic-ferritic steel, Materials Science Forum, vols. 294-296 (1999) 641-644
  55. W.A. Świątnicki, S. Poulat, L. Priester, B. Decamps, M.W. Grabski: Thermal stability of extrinsic dislocations in 11 grain boundaries in nickel, Acta Materialia, vol. 46 (1998) 1711-1717
  56. W. Świątnicki, J.Krzyczkowska and M.W. Grabski: The interphase boundary effect on plastic deformation of the austenitic-ferritic steel, Inżynieria Materiałowa, rok XIX, nr 3 (1998) 215-219
  57. R. Obrubko, W. Zieliński and W. Świątnicki: In situ TEM deformation study of austenitic-ferritic steel, Inżynieria Materiałowa, rok XIX, nr 3 (1998) 347-350
  58. W. Świątnicki, M. Gasperini, B. Tkaczyk: Strain localisation during simple shear in commercial aluminium alloys, Inżynieria Materiałowa, rok XIX, nr 3 (1998) 510-513
  59. T. Aksman, R. Obrubko, W. Zieliński and W. Świątnicki: TEM investigations of lattice dislocations interaction with interphase boundaries, Proceedings XVII Conference on Applied Crystallography, Wisła 1997, eds. H. Morawiec, D. Stróż, World Scientific, Singapore 1997, s. 487-490
  60. M. Gasperini, C. Pinna, W.A. Świątnicki: Microstructural evolution of an aluminium alloy during high shear deformation, Acta Materialia, vol. 44 (1996) 4195-4208
  61. W.A. Świątnicki: Structural basis of interface engineering Acta Physica Polonica,vol. 89 (1996) 235-249
  62. W. Świątnicki, M. W. Grabski: TEM investigation of dislocation reactions at interphase boundaries, Proceedings IX Conference on Electron Microscopy of Solids, red. A. Czyrska-Filemonowicz et al, Kraków-Zakopane 1996, s. 223-226
  63. W.A. Świątnicki, M.W. Grabski: Interaction of lattice dislocations with interphase boundaries, Materials Science Forum, vols. 207-209 (1996) 769-772
  64. W.A. Świątnicki, L. Priester, M.W. Grabski: Stability of lattice dislocations at grain boundaries in nickel bicrystals, Materials Science Forum, vols. 207-209 (1996) 773-776
  65. W. Zieliński, W. Świątnicki, J.W. Wyrzykowski: Glide of dislocations in metals by in-situ TEM, Proceedings 5th International Scientific Conference: Achievements in Mechanical & Materials Engineering AMME, red. L. A. Dobrzański, Gliwice-Wisła 1996, s. 269-272
  66. W. Świątnicki, S. Lartigue-Korinek, J-Y. Laval: Grain boundary structure and intergranular segregation in Alumina, Acta Metallurgica & Materialia, vol. 43 (1995) 795-805
  67. W. Oliferuk, W.A. Świątnicki, M.W. Grabski: Effect of the grain size on the rate of energy storage during the tensile deformation of an austenitic steel, Materials Science and Engineering, vol. A197 (1995) 49-55
  68. W. Oliferuk, W.A.Świątnicki, M.W. Grabski: Rate of energy storage and microstructure evolution during the tensile deformation of austenitic steel, Materials Science &Engineering, vol. A161 (1993) 55-63
  69. J.P. Morniroli, A. Leclere, W. Świątnicki, J-Y.Laval: Characterisation of grain boundary misorientation in -alumina by large angle convergent beam electron diffraction, Journal de Physique IV, vol. 3 (1993) 1455-1458
  70. W. Oliferuk, W.A. Świątnicki, M.W. Grabski: Wpływ wielkości ziarn na zdolność magazynowania energii podczas jednoosiowego rozciągania stali austenitycznej, Prace IPPT (1992)
  71. W.A. Świątnicki, J. Świderski, M.W. Grabski: Diffusional properties of interphase boundaries in two-phase ferritic-austenitic steel, Journal de Physique, vol. 51, C1 (1990) 647-651
  72. W.A. Świątnicki, S. Lartigue, M. Biscondi, D. Bouchet: Intergranular sulfur segregation and grain boundary plane in a nickel bicrystal, Journal de Physique, vol. 51, C1 (1990) 341-346
  73. W.A. Świątnicki, M.W. Grabski: Boron influence on grain boundary dislocations mobility in Ni3Al, Acta Metallurgica, vol. 37, No5 (1989) 1307-1311
  74. W.A. Świątnicki, E. Jezierska, M.W. Grabski: Stability of trapped lattice dislocations on interphase boundaries in duplex stainless steel, Materials Science and Technology, vol.5 No12 (1989) 1168-1171
  75. W.A. Świątnicki, M.W. Grabski: Effect of distribution of grain boundary diffusivity on plastic flow of austenitic steel, (part I), Materials Science & Engineering, Vol. 100 (1988) 85-92
  76. W.A. Świątnicki, M.W. Grabski: The role of dislocation annihilation in grain boundaries in the plastic flow of polycrystalline materials, (part II), Materials Science & Engineering, vol.100 (1988) 93-100
  77. W.A. Świątnicki, W. Łojkowski, M.W. Grabski: Investigation of grain boundary diffusion in polycrystals by means of extrinsic grain boundary dislocations spreading rate, Acta Metallurgica, vol. 34, nr 4 (1986) 599-605
  78. W.A. Świątnicki, M.W. Grabski: Effect of carbon and chromium on grain boundary diffusional properties in austenitic steels, Acta Metallurgica, Vol. 34, nr 5 (1986) 817-822
  79. W.A. Świątnicki, M. Styczyńska, M.W. Grabski: The effect of grain boundary precipitation on the stability of extrinsic grain boundary dislocations in austenitic steel and aluminium alloy, Acta Metallurgica, vol. 33, nr 9 (1985) 1643-1950
  80. W.A. Świątnicki, J.W. Wyrzykowski, M.W. Grabski: Wpływ czasu eksploatacji na efekty starzenia odkształceniowego w stali typu 15HM, Archiwum Nauki O Materiałach, nr 5 (1984) 93-102